A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Use (VAS 3409) - 2 - for this.
-
Position - 1 - (T10145)
‹› When removing make sure that the surface of the cylinder is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with assembly paste before inserting.
-
Insert inner seal in brake caliper groove using (VAS 3409).
-
Press in the protective cap using - 1 - and - 2 -.
-
Item - 1 - (T10146/5)
-
Position - 2 - (T10145)
‹› Use protective backings.
-
Press the protective cap onto the brake caliper housing so that it contacts the brake caliper housing all around - arrow -.