A8 Quattro Sedan V8-4.2L (BGK) (2006)
‹› Notch - B - is slightly offset inward toward chain roller - 16 -
Continuation
-
Slide the camshaft adjuster between the drive chain (2nd technician needed).
-
Install the camshafts with drive chain and camshaft adjuster onto the cylinder head.
-
Oil the running surfaces of both camshafts.
‹› Alignment sleeves for the bearing caps and camshaft adjuster must be installed in the cylinder head.
-
Install the bearing caps 3, 5, and 7 according to the marks.
-
Tighten the bearing caps 3, 5 and 7 for the intake and exhaust camshafts in a alternating diagonal sequence.
-
Tighten the camshaft adjuster - 10 - bolts.
-
Remove the (3366).
-
Check whether the camshafts are correctly adjusted:
‹› The two camshaft marks must align with both arrows on the bearing caps - arrows -.