A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Replace O-rings -2- and -4- and filter component -3-.
Note: -
By removing the filter element, a valve is opened that allows the oil in the filter housing to flow automatically back into the crankcase.
-
Observe installation position of tab on oil filter.
-
Observe waste disposal regulations!
-
Insert new oil filter in filter housing.
-
Install new O-ring -2- and lubricate lightly.
-
Install oil filter cover -1-.
-
Remove noise insulation. See: Body and Frame/Sound Proofing / Insulation/Service and Repair
-
Open oil drain plug on oil pan or extract engine oil.
-
Install oil drain plug.
-
Fill motor oil.
Note: -
Install oil drain plug with new gasket.
-
Check for cleanliness.
Tightening Specifications
Oil filter cover ......................................................................................................................................................................................................... 25 Nm
Oil drain plug on oil pan ......................................................................................................................................................................................... 25 Nm