A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Guide Humidity Sensor (G355) electrical wires between molded headliner and body.
-
Spread the cover - 1 - apart slightly at both sides - arrows - and remove the humidity sensor (G355) - item 2 -.
Installing
Install in reverse order of removal, observing the following:
‹› After removing sun visor center support, always remove traces of locking fluid from tapped holes. Otherwise, there will be a danger of the bolts
seizing and shearing off on subsequent disassembly.
‹› Cleaning can be performed using a tap of appropriate size.
‹› Replace self-locking bolts.
-
Carefully place Humidity Sensor (G355) in side guides.
‹› If Humidity Sensor (G355)is not installed correctly, it will not be centered in hole in cover.
-
Install interior mirror.
-
Install front interior light. Refer to=> [ Front Interior Lamp with Roof Electronics Control Module, from 09.07 ] See: Lighting and Horns/Dome
Lamp/Service and Repair/Front Interior Lamp with Roof Electronics Control Module, from 09.07.