A8 Quattro Sedan V8-4.2L (BGK) (2006)
Tail Lamp Control Module: Service and Repair
Rear Taillamp Control Module, Removing and Installing
Rear Taillamp Control Module, Removing And Installing
Removing
-
Remove outer rear light.
-
Press catches apart - arrows - and detach housing cover.
-
Disconnect connector.
-
Remove bolts - arrows - and remove Taillamp Control Module from rear light housing.
Installing
Install in reverse order of removal, observing the following:
-
Install outer rear light.
Tightening torque
Taillight control module to housing cover: 1 Nm