A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-1668010.png)
-
Tighten bolts for mechatronics unit to 8 Nm in specified order, i.e. first bolt - 1 -, then - 2 - and so on through - 11 -.
-
Attach locking clip - A - for wiring harness connector - B -.
-
Install ATF screen => [ ATF Screen ] .
-
Install oil pan => [ Oil Pan ] .
-
Rotate electrical connector at left of transmission clockwise opposite direction of - arrow - and remove.
