A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-1706004.png)
‹› It must be raised or lowered accordingly with the (V.A.G 1383 A) after removing the tunnel crossmember.
-
Slide tunnel crossmember as far back as possible so that transfer case oil inspection and filler plug - arrow - are accessible.
-
Place the (V.A.G 1782) under the transmission.
Wear protective eyewear.
-
Remove transfer case oil inspection and filler plug - arrow -.
‹› The transfer case oil inspection and filler plug is located at the side of the transfer case housing and is installed from below - arrow -.
‹› In the illustration, the transfer case is partially from behind so that the axle oil level with filler opening is visible.
Axle oil capacities, refer to => [ Specifications ] See: Specifications/Mechanical Specifications/Automatic Transmission/Transaxle/System
Specifications/09EA Transmission/Table of Contents
