A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-2743002.png)
-
Carefully release and disconnect electrical harness connector - 2 - on left connector flange.
-
Connect multimeter between terminal 2 and 3 on connector - A - for resistance measurement.
-
For measured value 0 ohms there is a short circuit, for measured value infinite ohms an open circuit.
‹› To check resistance values "tank full" or "tank empty", Fuel Level Sensor 3 must be removed, refer to Repair Manual and the sensor floater must
be allowed to glide to upper or lower end position.
