audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Technical Service Bulletins for PROM - Programmable Read Only Memory:|191003|Page 8783 > < All Technical Service Bulletins for PROM - Programmable Read Only Memory:|191003|Page 8781
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Campaign - Customer Satisfaction Vehicle Update

00 07 05 

March 5, 2007 

2012277/3 Supersedes Technical Service Bulletin Group 00 number 06-09 dated Nov. 16, 2006 due to addition of Saga warranty data. 

Vehicle Information

Condition

This Required Vehicle Update (RVU) is in effect for 15 months from date of publication. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet ALL of the following criteria.

1.

Procedure is valid only for vehicles that show the IK code in the ElsaWeb View Campaign inquiry screen on the day of repair

2.

Vehicle must be within the Limited New Vehicle Warranty.

3.

Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must also be performed on
applicable vehicles in Dealer inventory.

This Required Vehicle Update (RVU) has been proactively released for customer satisfaction purposes to prevent the following conditions from
occurring in the vehicle. Some of the updates contained in this RVU may not be necessary to perform due to prior service repairs and VIN range
restrictions.

Silicate Cartridge Installation Conditions:

^

Poor or no heating in any or all heating zones of the vehicle

Engine Control Module Update Conditions:

^

ECM software update to prevent possible engine coolant scaling in HVAC system.

Battery Energy Manager (BEM) Update Conditions:

^

The battery warning light in the instrument cluster  intermittently flashes and/or the battery level display screen of the car menu in the MMI shows
10% battery state of charge.

^

Battery condition is good and charging system is functioning normal

Tire Pressure Monitoring System (TPMS) Control Module Update Conditions:

^

Tire Pressure Monitoring System Warning is on

^

TPM System Option in MMI always states "Off" and can never be turned "On"

Technical Backaround

Not Applicable

Production Solution

Not Applicable

Service

^

Silicate Cartridge Installation

All Technical Service Bulletins for PROM - Programmable Read Only Memory:|191003|Page 8783 > < All Technical Service Bulletins for PROM - Programmable Read Only Memory:|191003|Page 8781