A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Connect portable multimeter (VAG1526) for voltage measurement as follows.
-
Switch ignition on.
‹› Specified value: approx. battery voltage
-
Switch ignition off.
If specified value is not obtained:
-
Connect test box (VAG1598/31) to wiring harness of Engine Control Module (ECM),
-
Check the following wire connection for open circuit according to wiring diagram:
-
Check the wire for short circuit to B+ and Ground (GND).
‹› Specified value: infinite ohms (no continuity)
-
Repair open circuit in wiring or short circuit if necessary.
If no malfunctions are detected: