A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-2362002.png)
-
Carefully release and disconnect electrical harness connector - 1 - on left connector flange.
-
Connect multimeter between terminal 2 and 4 on connector - B - for resistance measurement.
-
For measured value 0 ohms there is a short circuit, for measured value infinite ohms an open circuit.
‹› To check resistance values "tank full" or "tank empty", Fuel Level Sensor (G) must be removed, refer to Repair Manual and the sensor floater
must be placed in upper or lower end position.
