A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Remove the CMP sensor washer and cover.
Continuation for Both Sides
‹› In the following illustrations, the right cylinder head is shown.
-
To guide the (2085), thread the (2085/1) into the camshaft by hand until seated.
-
Loosen the inner portion of the (2085) two rotations from the outer portion and secure with the knurled screw.
-
Grease the threaded head of the (2085), position and screw into the oil seal as far as possible with forced pressure.
-
Loosen the knurled screw and turn the inner part against the camshaft until the seal is removed.
-
Place the (3241/2) on the camshaft.