A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Remove the front bumper.
-
Bring the lock carrier into the service position.
-
Release the tension on the ribbed belt.
-
Remove the ribbed belt from the power steering pump pulley.
-
Place the (VAS 6208) underneath to collect the hydraulic fluid.
-
Loosen the hose clamp - 4 - for the suction hose - 3 -.
-
Remove the suction hose and lay aside.
-
Remove the banjo bolt - 2 - for the pressure line - 1 -.
-
Plug the connection holes with plugs.
-
Install a piece of wood with a width of 50 mm - a - between the longitudinal member - 1 - and the lock carrier - 2 -.