A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Unscrew bolts -2- and remove solenoid valve block with bracket.
Installing
Installation is in reverse order. Note:
-
Insert solenoid valve block.
-
Screw in bolts -2- and tighten.
-
Install air lines -arrows- on solenoid valve block and tighten.
-
Plug in connector -1-.
Line assignment on solenoid valve block
The air lines are color-coded:
1 - Blue, right rear air spring damper
2 - Black, left rear air spring damper
3 - Green, right front air spring damper
4 - Brown, air supply unit
5 - Red, left front air spring damper
6 - Purple, pressure accumulator
-
Perform system filling with VAS 5051.
-
Install the wheel housing liner.
-
Install and tighten wheel.
Tightening torque:
Tightening torque