audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

How to Find Wiring Diagrams|Page 14497 > < How to Find Wiring Diagrams|Page 14495
Page 2
background image

‹› Always replace.

6

Air Spring Damper

‹› See - item 24 - in => [ Mounting Bracket, Upper Control Arms and Air Spring Damper Assembly Overview ] See: Air Spring/Service and

Repair/Removal and Replacement/Front Suspension/Mounting Bracket, Upper Control Arms and Air Spring Damper Assembly Overview.

7

Self Locking Nut

‹› Always replace.

8

Wheel Bearing Housing

‹› Removing and installing, refer to => [ Wheel Bearing Housing ] See: Wheel Bearing/Service and Repair/Removal and Replacement.

‹› Wheel bearing Housing and Wheel Bearing Unit, Assembly Overview => [ Wheel Hub, Bearing and Housing Assembly Overview ] See:

Wheel Hub/Service and Repair/Front Suspension/Wheel Hub, Bearing and Housing Assembly Overview.

‹› Wheel bearing unit, removing and installing => [ Wheel Hub and Bearing ] See: Wheel Hub/Service and Repair/Front Suspension/Wheel Hub

and Bearing.

9

Self Locking Nut, 120 Nm

‹› Always replace.

‹› If the track control arm is not replaced, remove the locking compound from the ball joint threads first.

10

Self Locking Nut, 40 Nm + 90° additional turn

‹› Always replace.

‹› Raise the wheel bearing housing before tightening. Refer to => [ Wheel Bearing Housing, Raising to Control Position to Tighten Bolts ] See:

Wheel Bearing/Service and Repair/Procedures/Front Suspension.

11

Connecting Link

‹› Right and left sides are the same.

‹› Installed position, refer to => [ Connecting Link Installed Position ] See: Stabilizer Bar/Service and Repair/Front Suspension/Subframe,

Engine Carrier and Stabilizer Bar Assembly Overview.

‹› Removing and installing, refer to => [ Connecting Link ] See: Suspension Strut / Shock Absorber/Service and Repair/Front Suspension.

12

Bolt, 40 Nm + 90° additional turn

‹› Always replace.

‹› Raise the wheel bearing housing before tightening. Refer to => [ Wheel Bearing Housing, Raising to Control Position to Tighten Bolts ] See:

Wheel Bearing/Service and Repair/Procedures/Front Suspension.

13

Stabilizer Bar

‹› with cast rubber bushings and clamps.

‹› Removing and installing, refer to => [ Stabilizer Bar ] See: Stabilizer Bar/Service and Repair/Front Suspension/Stabilizer Bar.

‹› Note the different suspension versions. Refer to => [ PR Number Explanations ] See: Application and ID.

14

Track Control Arm

‹› Removing and installing, refer to => [ Track Control Arm ] See: Control Arm/Service and Repair/Track Control Arm.

‹› Bushing replacing, refer to => [ Track Control Arm Bushing ] See: Control Arm/Control Arm Bushing/Service and Repair/Track Control Arm

Bushing.

How to Find Wiring Diagrams|Page 14497 > < How to Find Wiring Diagrams|Page 14495