A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-3241003.png)
-
Remove the left - 1 - and right - 2 - transmission bolts on tunnel crossmember.
-
Remove the transmission tunnel crossmember from the body - arrows -.
-
Lower or raise transmission accordingly with (V.A.G 1383 A) until transmission is horizontal in installation position again.
‹› The transmission must be level to check the axle oil.
‹› It must be raised or lowered accordingly with the (V.A.G 1383 A) after removing the tunnel crossmember.
-
Slide tunnel crossmember as far back as possible so that transfer case oil inspection and filler plug - arrow - are accessible.
