A8 Quattro Sedan V8-4.2L (BGK) (2006)
‹› If the oil strainer is replaced, the seal must first be removed.
‹› If the used oil strainer is re-installed, this seal can be re-used.
Note the following when replacing with a new oil strainer:
-
Carefully remove the oil strainer seal - A - from the transmission with a screwdriver.
‹› Do not damage sealing surface.
‹› The new oil strainer comes with the seal installed.
‹› When replacing with a new oil strainer, press it into the transmission with the seal already installed.
Continuation for new and old oil strainer:
-
Carefully press the intake neck on the oil strainer - A - into the opening on the transmission as far as the stop.
-
Install the oil pan. Refer to => [ Oil Pan ] See: Oil Pan.