A8 Quattro Sedan V8-4.2L (BGK) (2006)
‹› Place a non-slip pad between the assembly lever and the subframe - arrow -, for example, a piece of rubber, so that the assembly lever cannot
slide out with pushing.
-
Install the spring pin on the selector shaft lever while it is still removed.
-
Slide selector shaft lever onto shaft and drive in spring pin.
-
Install shield on lever/selector shaft.
-
Press the selector lever cable - 1 - onto selector shaft lever - 3 -.
‹› Do not bend selector shaft lever when pressing on, otherwise shift mechanism can no longer be adjusted exactly.