A8 Quattro Sedan V8-4.2L (BGK) (2006)
‹› Position the cover on the (VW 401) and (VW 402).
‹› Hold the flange shaft - A - with one hand to prevent it from falling down.
-
Remove flange shaft.
‹› Place a pry bar - A - underneath to prevent damaging the housing.
Installing
Install in reverse order of removal.
Installing shaft seal:
‹› The two-piece (T10136) is used to install the shaft seal.
-
Place self-locking center differential cover - A - on thrust plate of the (T10136).