A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-3371007.png)
Transmission must not be supported at the transmission oil pan, otherwise it will be damaged and must be replaced.
-
When installing crossmember to body, observe installation position (markings from removal).
-
Tighten bolts - arrows - to specified torque.
-
Bolt driveshaft to transmission flange.
-
Reconnect front exhaust pipes to rear exhaust system.
-
Adjust selector lever cable.
-
Install front ashtray and center console cover.
-
Connect Ground (GND) strap to battery.
-
Check shift mechanism.
