A8 Quattro Sedan V8-4.2L (BGK) (2006)
Shift Cable: Removal and Replacement
Selector Lever Cable
Selector Lever Cable
Special tools, testers and auxiliary items required
‹› Pry Lever - RMV Outside Mirror (80 - 200)
‹› Engine/Transmission Jack (V.A.G 1383 A)
Removing
-
Move the selector lever into D.
-
Turn off the ignition.
-
Remove the supply hose on both sides between the air filter and the throttle body.
-
Remove the handle on the selector lever. Refer to => [ Selector Lever Handle ] See: Service and Repair/Removal and Replacement/Selector Lever
Handle.
-
Remove front ashtray.
-
Remove center console cover panel.
-
Disconnect the connector - 1 - from the protective cover - 2 -.
-
Disconnect the electrical connector - 1 - from the circuit board.
-
Disconnect the electrical connector - 3 - for the shift lock solenoid.
-
To disconnect cover from shift mechanism function unit, carefully release retaining tabs - arrows - one after another.