A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-3368003.png)
Removing and installing, actuator mechanism for manual release
^
Shift unit is removed.
-
Remove bolts - 1 -.
-
Remove actuator mechanism.
-
Assemble components of actuator mechanism as follows:
-
Insert sliding bracket - 3 - with tabs - arrows A - into cut-outs - arrows B - of cover - 2 -.
-
Clip end of bowden cable - 4 - into sliding bracket and bracket into cover.
-
Secure actuator mechanism with the flat edge - arrow C - facing connecting wires on shift unit.
