A8 Quattro Sedan V8-4.2L (BGK) (2006)
‹› Distance from flange to drive pinion =
Dimension a
‹› Distance from flange to drive pinion securing nut =
Dimension b
-
Note measurements.
‹› When removing the securing nut, count and make a note of the number of turns.
‹› Illustrations show the final drive removed for the following work sequence.
‹› Use the existing securing nut for securing the flange to the drive pinion, otherwise it will not be possible to obtain the original installation position.
-
Mount Counter-hold tool (3028) and remove drive pinion securing nut.
-
Place drip tray underneath.