A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Rotate both rear wheels simultaneously in one direction and thereby turn flange through one complete rotation.
-
Make a paint marking at the point of greatest radial run-out on the outside of the flange (greatest distance from axis of rotation).
-
Then remove the previous marking from the flange.
-
Install driveshaft => [ Install the driveshaft on the
rear final drive. ] See: Differential Assembly/Service and Repair/Removal and Replacement/Rear Final Drive 0AR/Removal and Installation/Drive Shaft,
Removing From Rear Final Drive and Installing.