A8 Quattro Sedan V8-4.2L (BGK) (2006)
-
Then, first tighten bolt - A - and then bolts - B -. Tightening specification - 11 - => [ Hex Bolts ] See: Differential Assembly/Service and
Repair/Overhaul/01AA,01EA,02XA,0A3A,01VA,09EA,09LA Transmission/Rear Final Drive Overview and - 12 - => [ Hex Bolt ] See:
Differential Assembly/Service and Repair/Overhaul/01AA,01EA,02XA,0A3A,01VA,09EA,09LA Transmission/Rear Final Drive Overview.
-
Attach the driveshaft to the rear final drive => [ Attach the Driveshaft to the
Rear Final Drive. ] See: Driveshaft From Rear Final Drive.
-
Check the gear oil in the rear final drive. Refer to => [ Rear Final Drive Gear Oil, Checking ] See: Differential Assembly/Fluid -
Differential/Service and Repair/Removal and Replacement.
-
Install and adjust rear section of exhaust system free of stress.