A8 Quattro Sedan V8-4.2L (BGK) (2006)
Note:
^
When installing make sure that broad spacing -a- at joint coincides with narrow spacing -b- at hub after swiveling in.
^
Chamfer on internal diameter of ball hub (splines) must face drive axle.
-
Insert ball hub by swiveling hub out of cage -arrows- until the balls are set to track spacing.
-
Install hub with balls by pressing firmly on cage -arrow-.
Checking function of constant velocity joint:
Constant velocity joint has been properly assembled if ball hub can be pushed back and forth by hand over the entire length adjustment range.
-
Pack grease into joint body.