A8 Quattro Sedan V8-4.2L (BGK) (2006)
/Page-3583001.png)
Fluid - Transfer Case: Procedures
Transfer Case Fluid, with Separate Fluid Systems, Filling
Transfer Case Fluid, with Separate Fluid Systems, Filling
Special tools, testers and auxiliary items required
‹› Old oil collecting and extracting device (V.A.G 1782)
‹› Safety glasses
Conditions
‹› Axle oil temperature approx. 20°C (room temperature) to max. 50°C.
‹› Vehicle level.
‹› The vehicle must not be started or towed without ATF fluid.
The transmission must be filled after the following work or repairs:
‹› The cover was removed from transfer case and all ATF fluid was drained.
=> [ Separate and Combined Fluid Systems ] See: Automatic Transmission/Transaxle/Differential/Differential Fluid - A/T/Service and
Repair/Separate or Combined Oil Systems, Differentiation
Work procedure
-
Remove rear noise insulation by loosening bolts - 2 -, - 3 - and - 4 -.
CAUTION!
For the following steps, note:
Do not support on transmission oil pan - risk of damage.
-
Insert a bolt M12x100 - 1 - with attached nut - 2 - in mount behind transmission oil pan.
