A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Tow Sensor: Service and Repair
Inclination/Anti-Theft Control Module
Inclination/Anti-Theft Control Module
‹› Component location: Under the right rear seat.
Removing
-
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Functions".
-
Switch off ignition and remove ignition key.
-
Remove rear seat bench or right individual seat.
-
Remove nuts - arrows - and remove Inclination-/Anti-Theft Control Module (J529) - item 2 -.
-
Disconnect electrical connector - 1 -.
Installing
Install in reverse order of removal, observing the following:
-
Install rear seat bench or right individual seat.