audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
All Other Service Bulletins for Collision Avoidance Module:|551110|Page 9910 > < All Other Service Bulletins for Collision Avoidance Module:|551110|Page 9908

A8 Quattro Sedan V8-4.2L (BVJ) (2008)

Page 3
background image

3. Remove the rubber cover and spring pin from the new spring-loaded bump stop assembly (part number 8H0 827 249 A).

Note:

Do not use metal pliers to unscrew the spring-loaded pin from the new part. The metal teeth will damage the soft plastic. Damage to the part will prevent
the rubber cover from seating properly on the bump stop.

4. Hand screw the new spring-loaded pin into the trunk lid.

All Other Service Bulletins for Collision Avoidance Module:|551110|Page 9910 > < All Other Service Bulletins for Collision Avoidance Module:|551110|Page 9908