A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-3147002.png)
‹› Carefully remove the retainer so that the contacts - 2 - of the multiple connector are not disconnected from the wiring harness.
Installing
Install in reverse order of removal, observing the following:
-
The retainer - 1 - can be pushed onto the multiple connector - 3 - in only one position.
‹› Guide pins - 4 - can be inserted into the retainer in only one position. Contacts - 2 - must be inserted in the retainer for this purpose.
-
Insert the retainer into the multiple connector until it engages audibly.
