A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-3321002.png)
-
Remove the bolts - 2 -.
-
Remove the rear crossmember - 1 -.
Installation is performed in the reverse order of removal.
-
Note the location of the rear crossmember - 1 -.
-
Bolt - 2 - tightening specification. Refer to - item 4 - in => [ Crossmembers and Tower Brace Assembly Overview ] See: Steering and
Suspension/Suspension/Service and Repair/Removal and Replacement/Front Suspension/Crossmembers and Tower Brace Assembly Overview.
