A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-3494002.png)
11 - Lumbar support adjustment motors (Qty. 2)
‹› Remove seat.
‹› Mount the fixture for seat repair (VAS 6136) on the engine and transmission holder (VAS 6095).
‹› Attach the front seat to the fixture for seat repair (VAS 6136).
‹› Remove top backrest cover. See: Service and Repair/Removal and Replacement/Power Memory Front Seats/Upper Backrest Cover
‹› Remove bottom backrest cover. See: Service and Repair/Removal and Replacement/Power Memory Front Seats/Lower Backrest Cover
‹› Open cable ties - 8 - and - 10 -.
‹› Disconnect connector - 9 -.
‹› Unscrew cap nuts - 7 - (Qty. 3).
‹› Remove motor on opposite side the same way.
‹› Disengage cable for lumbar height adjustment - 1 - at hook - 4 -.
‹› Disengage cable for lumbar support adjustment - 2 - at retaining pins - 5 - and at relay pulley - 6 -.
‹› Remove motors for lumbar support (Qty. 2).
‹› Installing
‹› Install motors for lumbar adjustment - 11 - in reverse order of removal.
