A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Fuel Door Lock Switch: Service and Repair
Tank Door/Rear Lid Release Switch
Front Door Trim
Tank Door/Rear Lid Release Switch
Removing
-
Remove door trim => [ Front Door Trim ]. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Front Door Trim/Front Door Trim
-
Remove insulation => [ Insulation ] See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and
Replacement/Front Door Trim/Insulation and => [ Front Door Trim ]. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair/Removal and Replacement/Front Door Trim/Front Door Trim
-
Remove hinged pocket with mount => [ Hinged Pocket with Mount ]. See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service
and Repair/Removal and Replacement/Front Door Trim/Hinged Pocket With Mount
-
Remove bolts - 1 - (Qty. 2).
-
Remove cover - 4 -.
-
Pry out switch - 2 - on right side and pull off switch - 2 -.
-
Remove connector - 3 -.
Installing
-
Install tank lid/rear lid release switch in reverse order of removal.