A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-1735004.png)
-
Slide the guide bolt - 3 - through the brake caliper and the brake pads.
After inserting guide pins, retaining spring must be pressed under pins so that it is tensioned. If installed incorrectly, brake pads do not
remain in the correct position and will not work correctly.
-
Tighten the screw for the guide bolt - 18 - to the tightening specification (30 Nm).
-
Insert the left and right balance springs - A - into the hole in the bottom of the brake pads first - C -.
-
Then engage the left and right balance springs - A - into the guide bolts - B - with pliers.
