A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-1806001.png)
Parking Brake Control Module: Service and Repair
Electromechanical Parking Brake Control Module
Electromechanical Parking Brake Control Module
Removing
-
Remove the battery.
-
Pull locking slide in - direction of arrow - and remove connector - 1 -.
-
EPB control module item - 2 -
-
Remove nuts - 1 -.
-
Remove EPB control module item - 2 -
Installing
Installation is the reverse of removal, with special attention to the following:
-
Install nuts - 1 -, tightening specification: 10 Nm.
-
If control module is replaced, select "Replace" function for respective control module in Guided Fault Finding using Vehicle Diagnosis, Testing
and Information System (VAS 505x).
Make sure the brakes are working correctly before driving the vehicle for the first time.
