A8 Quattro Sedan V8-4.2L (BVJ) (2008)
‹› Secure all hose connections with hose clamps appropriate for the model.
‹› During installation, all cable ties must be re-installed at the same location.
-
Clean or smooth O-ring sealing surfaces.
-
Install right secondary air injection combi-valve. Refer to => [ Secondary Air Injection Right Combination Valve ] See: Powertrain
Management/Emission Control Systems/Air Injection/Air Injection Control Valve/Service and Repair/Secondary Air Injection Right Combination
Valve.
-
Install left coolant pipe. Refer to => [ Left Coolant Pipe ] See: Left Coolant Pipe.
-
Install Hall sensor. Refer to => [ Valvetrain Assembly Overview ] See: Engine/Camshaft, Lifters and Push Rods/Service and Repair/Valvetrain
Assembly Overview.
-
Install Throttle Valve Control Module (J338).
-
Install crankcase ventilation pressure regulator valve.
-
Fill with coolant => [ Filling ] See: Service and Repair/Procedures.