A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Remove air guide at right rear from lock carrier.
-
Mark holes according to dimensions - a and b - at lock carrier as shown.
‹› Dimension - a - = 40 mm.
‹› Dimension - b - = 55 mm
-
Make a bore 24 mm in dia.
‹› The bore must be pre-bored and then drilled to 24 mm in dia. using the stepped quick-helix drill.
-
Remove bolts - 1 and 2 - on torque support bracket.