Audi Workshop Service and Repair Manuals

Oil Cooler: Service and Repair
Oil Filter Housing

Oil Filter Housing

Removing

-

Remove intake manifold.

‹› To collect escaping engine oil, place a clean cloth around oil filter housing.

-

Remove cover and remove oil filter insert.

-

Remove bolts - arrows - and remove oil filter housing.

Installing

‹› Tightening specifications => [ Oil Filter Housing Assembly Overview ] See: Oil Filter Housing/Service and Repair/Oil Filter Housing Assembly

Overview.

Installation is in reverse order of removal, note the following:

‹› Replace sealing rings and O-rings.

-

Install intake manifold.

-

Check oil level. Refer to => [ Oil Level, Checking ] See: Testing and Inspection/Component Tests and General Diagnostics.