A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Oil Pressure Sender: Service and Repair
Oil Pressure Switch
Removing
-
Bring lock carrier into service position. See: Body and Frame/Lock Carrier
-
Disconnect electrical connector - 2 - on Oil Pressure Switch (F1) - 1 -.
-
Remove Oil Pressure Switch (F1).
Installing
‹› Tightening specifications. Refer to => [ Oil Filter Housing Assembly Overview ] See: Oil Filter Housing/Service and Repair/Oil Filter Housing
Assembly Overview.
Installation is in reverse order of removal, note the following:
‹› Replace sealing ring.
‹› Secure all hose connections with hose clamps appropriate for the model.
-
Install lock carrier with attachments.