A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Remove rubber seal - 1 - and remove plenum chamber covers - 2 and 3 -.
-
Remove tower brace rear bolts - 3 -.
-
Secure Engine Support Bridge (10 - 222 A /21) with Adapter (10 - 222 A /4) at suspension strut towers.
‹› Support for left and right side of vehicle is marked.
‹› The middle contact point - 2 - of the support is placed on the tower brace front bolts.
‹› The Adapters (10 - 222 A /21) are secured with the tower brace rear bolts - 3 -.