A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-3732002.png)
‹› When installing the outer bolts, place washers between the headlamp housing and the bumper cover.
-
Adjust fog lamps.
Tightening Specifications
Fog Lamp Bulb
Removing
-
Remove fog lamp. Refer to => [ Fog Lamp ].
-
Turn bulb - 1 - counter-clockwise - arrow - and pull it out of fog lamp housing.
Installing
Install in reverse order of removal, observing the following:
-
Do not touch glass cone with bare hands.
-
Secure lamp bulb by turning clockwise.
-
Adjust fog lamps.
