A8 Quattro Sedan V8-4.2L (BVJ) (2008)
Marker Lamp: Service and Repair
Side Marker Lamps
=> [ Side Marker Lamps ]
=> [ Side Marker Lamp Bulbs ]
Side Marker Lamps
Special tools, testers and auxiliary items required
‹› Pry lever (80 - 200)
Removing
-
Switch off ignition and remove ignition key.
-
Turn light switch into "0" position.
-
Attach bumper cover using a strip of adhesive tape on inside of cornering lamp - 1 -.
-
Lift the side marker lamp about 10 mm using a (80 - 200) as shown in the illustration.
-
Slide the side marker lamp far enough toward the center of the vehicle on the adhesive tape strips - arrow - so it can be removed from the bumper
cover with the electrical connector.
-
Remove the side marker from the bumper cover at the rear edge - arrow -.