A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Pull bulb for parking lamp out of socket.
Installing
Install in reverse order of removal, observing the following:
-
Insert new bulb into socket, do not touch glass cone with bare hands when doing so.
-
Push socket into reflector until it engages noticeably.
-
Close the housing lid.
-
Connect battery. Required actions, refer to => [ To connect, connect terminal clamp of ground (GND) wire by hand to battery negative terminal
and tighten nut. ] See: Starting and Charging/Tools and Equipment/Battery, Disconnecting and Connecting.