A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-3808002.png)
-
Attach new adhesive strip and remove backing.
-
Position rear lamp from outside at retaining pin and press towards center of vehicle until it engages.
-
Press body cover panel onto rear lamp to affix double-sided adhesive tape.
Tightening Specifications
Tail Lamp LED Circuit Boards
Removing
-
Remove outer rear lamp. Refer to => [ Outer Tail Lamps ].
-
Press catches apart - arrows - and detach housing cover.
-
Unplug connector.
-
Remove bolts - 1 through 6 -.
