audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Outer Tail Lamps Component Overview, Through 08.07|Page 12217 > < Outer Tail Lamps Component Overview, Through 08.07|Page 12215
Page 1
background image

Tail Lamp: Service and Repair
Inner Tail Lamps, Through 08.07

Inner Tail Lamps, through 08.07

=> [ Inner Tail Lamps ] 

=> [ Back-Up Lamp and Rear Fog Lamp Bulb ] 

=> [ LED Circuit Boards and Tail Lamp Control Module ] 

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] See: Service Precautions.

Inner Tail Lamps

Removing

-

Switch off ignition and remove ignition key.

-

Turn light switch into "0" position.

-

Remove luggage compartment lid trim.

-

Unplug connector - arrow -.

-

Remove nut - 1 - and detach rear lamp.

-

If necessary, pull wire with grommet out of luggage compartment lid.

Installing

Install in reverse order of removal, observing the following:

‹› Replace adjusting nuts if sealing washer is damaged.

‹› Check for proper sealing of grommet between luggage compartment lid and wire.

-

Install luggage compartment lid trim.

Tightening Specifications

 

Outer Tail Lamps Component Overview, Through 08.07|Page 12217 > < Outer Tail Lamps Component Overview, Through 08.07|Page 12215