A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-2179002.png)
-
Perform the test as described in the corresponding repair procedure.
Installing the ECM
Install in reverse order of removal.
-
Thereafter, the ECM must be equipped with the metal retainer.
-
Clean the threaded holes for the shear bolts of locking compound residue. Cleaning can be performed with a thread cutter (tap).
-
Always use new shear bolts.
‹› When ending Guided Fault Finding, the tester attempts to erase the Diagnostic Trouble code (DTC) memory of all control modules. If this is not
successful, the remaining DTCs stored in the memory must be corrected until all DTCs can be erased.
