A8 Quattro Sedan V8-4.2L (BVJ) (2008)
-
Insert wire end from front up to stop into jaws of the pliers and squeeze the pliers completely.
-
Open the pliers again and remove the stripped wire end.
-
Twist the bare strands one half turn.
-
For the repair of a 0.25 mm 2 wire, use a small yellow crimp connector from the (VAS 1978 B).
-
To press the crimp connector, use the (VAS 1978/1-2) with (VAS 1978/1-1).
-
Slide the small yellow crimp connector onto both stripped, non-insulated wire ends on the vehicle specific single wire and crimp them using crimp
pliers.