A8 Quattro Sedan V8-4.2L (BVJ) (2008)
‹› If measured value is 0 ohms there is a short circuit. If measured value is infinite ohms there is and open circuit in the wiring.
‹› To check resistance values "tank full" or "tank empty", the Fuel Level Sensor 2 (G169) must be removed. Refer to => [ Fuel Level Sensor 2, Right
Lever Sensor ] See: Fuel Delivery and Air Induction/Fuel Tank/Fuel Gauge Sender/Service and Repair/Fuel Level Sensor 2, Right Lever Sensor
and the sensor floater must be placed in upper or lower end position.
‹› With Fuel Level Sensor 2 (G169) removed, the following values are obtained because of the greater deflection of the floater arm: