audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Intake Manifold and Injectors, with Magnesium Manifold|Page 4697 > < Intake Manifold and Injectors, with Magnesium Manifold|Page 4695

A8 Quattro Sedan V8-4.2L (BVJ) (2008)

Page 10
background image

-

Then position the (T10133/16) and remove the fuel injector by loosening the bolt - 1 -.

‹› When setting the (T10133/2A) in place, the radial adjustment can be destroyed, because the retaining tabs break. 

-

Carefully remove the old combustion chamber seal - arrow -, thereby cutting the seal open with a knife or spreading the seal open with a small
screwdriver and pulling it forward and off.

-

Make sure that the groove of the fuel injector does not become damaged. If the groove is damage, the fuel injector must be replaced.

Installing

Intake Manifold and Injectors, with Magnesium Manifold|Page 4697 > < Intake Manifold and Injectors, with Magnesium Manifold|Page 4695