A8 Quattro Sedan V8-4.2L (BVJ) (2008)
/Page-1374011.png)
-
Make sure that the groove of the fuel injector does not become damaged. If the groove is damage, the fuel injector must be replaced.
Installing
‹› Replace the combustion chamber seal and O-ring.
‹› Replace the spacer ring if damaged.
‹› Lightly lubricate the fuel injector O-rings with clean engine oil.
‹› Reinstall the injectors at same cylinder.
-
Clean the cylinder head bore with (T10133/4).
-
Clip the radial adjustment - 1 - to the support ring - 2 -.
